Rent out your DGX Spark: requirements and setup
Listing your Spark on GPUwerk Platform takes one evening, and you never touch your router. You need a 128 GB NVIDIA GB10 machine you own, a line with at least 300 Mbit/s down and 100 Mbit/s up, and a USB stick. The Spark stays where it is and dials out to GPUwerk: no shipping, no port forwarding, no public IP. GPUwerk then handles renters, billing and updates, and you keep 70% of every rented hour.
Ready to install? The step-by-step setup guide walks you through the USB stick, the firmware settings for your model and pairing.
Checklist
- Machine
- Any 128 GB NVIDIA GB10 machine you own: DGX Spark Founders Edition, ASUS, Lenovo, Dell, HP, MSI, Gigabyte, Acer or another maker. 64 GB GB10 models do not qualify
- Firmware
- TPM 2.0 on. Secure Boot on after the install
- Internet
- 300 Mbit/s down, 100 Mbit/s up; outbound HTTPS and UDP
- Network
- Wired Ethernet with DHCP; no port forwarding
- USB stick
- 16 GB or more, written on any Windows, macOS or Linux computer with about 8 GB free
- For the install
- A wired USB keyboard and a display
- Burn-in
- At least 1 hour, including one automatic restart, then a review by GPUwerk
- Payout account
- In your name: a SEPA IBAN for euros, a Czech bank account for CZK, or the local details Wise uses for almost every country. You can add it after listing
From the GPUwerk Platform console's settings and its install guide.
Who can host?
Businesses with or without a VAT ID and private individuals, in any country except those under EU sanctions (currently Russia, Belarus, Iran, North Korea, Cuba and Syria). You must own the Spark outright, and it can be in a different country from you. Any-location bookings stay in the EEA, so a Spark outside the EEA is rented by renters who choose its country.
Which machines qualify?
Every 128 GB GB10 machine. On 19 October 2026 GPUwerk confirmed the platform working on all eight GB10 models.
| Model | Firmware setup key | Source |
|---|---|---|
| NVIDIA DGX Spark Founders Edition | Esc or Del | NVIDIA recovery guide |
| ASUS Ascent GX10 | Del (hold) | ASUS FAQ 1057440 |
| Lenovo ThinkStation PGX | Del at the Lenovo logo | Lenovo HT518087 |
| Dell Pro Max with GB10 | Del at the Dell logo | Dell owner's manual |
| HP ZGX Nano G1n | Esc at the HP logo, then UEFI Firmware Settings | HP recovery article |
| MSI EdgeXpert | Del | MSI install guide |
| Gigabyte AI TOP ATOM | Del | Gigabyte manual |
| Acer Veriton GN100 | Del or F2 | Acer KB 19556 |
Then, on every model, one pass: Advanced → Trusted Computing → Security Device Support: Enabled, Boot → Boot Option #1: the USB stick, and F4 to save and restart from the stick (guide).
In the application, pick your model or choose Other. The setup stops on anything without a GB10 GPU and an Arm CPU.
What network does the Spark need?
The Spark only connects out, so you open no ports and need no public IP address. Your router just has to allow outgoing HTTPS (TCP 443) and UDP for the encrypted WireGuard tunnel; there is no TCP fallback yet. Plug in a cable: wired Ethernet with DHCP needs no input. A UPS is optional and recommended, because outages count against the Spark's reliability score.
Setup, step by step
- Start hosting. Sign in at console.gpuwerk.com (your renter account or a new one), click Start hosting, add your business details and accept the partner agreement, which includes the self-billing agreement and NVIDIA's DGX OS licence terms.
- Add a payout account, now or later. You can install and list first. Payouts start once GPUwerk has verified the account.
- Make the USB stick. Once you're approved, download the install image (one file of about 7 GB for every GB10 machine) and write it to a 16 GB stick with balenaEtcher or Rufus (guide).
- Boot the Spark from it. Copy anything you want to keep first: the install erases the internal drive. In firmware setup, turn the TPM on and boot the stick. If the old system starts instead, switch Secure Boot off briefly; the recovery turns it back on (guide).
- Pair it. The Spark shows a six-letter code, valid for 30 minutes. Enter it at console.gpuwerk.com/pair and confirm when the serial number and TPM fingerprint in the console match the Spark's screen (guide).
- Burn-in and review. At least 1 hour of automatic tests: GPU and memory, temperature under load, the network, renter isolation, and a connection with no break over 5 minutes. GPUwerk reviews the results and lists the Spark (guide).
If a test fails, the console names it; fix the cause and run the burn-in again (troubleshooting).
After it's listed
Renters can choose your Spark directly, any-location bookings use EEA partner machines once GPUwerk's own Sparks are in use, and you earn 70% of every hour a renter is charged: $0.55 at the $0.79 Partner Spark price. Earnings depend on renter demand and are not guaranteed. You pay the electricity and internet.
- Keep it online. If it is offline for more than 15 minutes in a row during a rental, that rental is forfeited: you lose the earnings from its last 24 hours, and the renter is credited all of it.
- Plan maintenance. Book a window in the console at least 48 hours ahead.
- Use it yourself. Start "Use my Spark" in the partner console whenever it is idle, at no charge.
- Leave any time. Unlist in the console, with no notice.
Run your own numbers in the earnings calculator, or read how to earn money with your DGX Spark.
Questions owners ask before renting out a Spark
Can I rent out my Spark behind CGNAT, without a public IP or port forwarding?
Yes, as long as outgoing UDP gets through: the Spark only connects out, so it needs no public IP address and no port forwarding. The burn-in checks the connection before the Spark is listed.
What internet connection do I need to rent out my GPU?
At least 300 Mbit/s down and 100 Mbit/s up, with outgoing HTTPS and UDP allowed. Wired Ethernet with DHCP needs no setup. Wi-Fi can be set on the Spark's own screen by pressing N, but it has only been tested in an emulator so far.
Does a 64 GB GB10 machine qualify?
No. GPUwerk Platform takes GB10 machines with 128 GB of unified memory only.
Does the DGX Spark need a monitor and keyboard to rent it out?
Only for the install: a wired USB keyboard (Bluetooth doesn't work in firmware setup) and a display for the pairing code and burn-in status. After that GPUwerk manages the Spark remotely, and the keyboard is needed only to change the network with N. Ask support before you run it without a display.
Can I still access my DGX Spark remotely once it is listed?
Through GPUwerk, yes: start Use my Spark in the partner console while it is idle, and you get an isolated instance like any renter, at no charge. A listed Spark has no local login, no SSH for you and no DGX dashboard, and nobody else can rent it while you use it.
How long until my Spark is listed?
One evening for the USB stick, the install and pairing, then at least 1 hour of automatic burn-in, including one restart. GPUwerk then reviews the results and lists the machine; it doesn't publish a fixed time for that review.
More in the partner FAQ and on is it safe?